 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Document No.: Tentative Product Specification Module name: P0340WQLC-T Issue date: 2009/6/17 Version: 2.2 Customer Approved by Customer Approved by CMEL PD Division ENG Division QA Dept FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA 92656 Http://www.AZDISPLAYS.com Note: 1. The information contained herein may be change without prior notice. It is therefore advisable to contact CHI MEI EL Corp. before designed your product based on this specification. 2. This tentative product specification is for reference, some item or setting maybe changed for evaluation. 1 Document No.: Reversion History Version Ver.1.0 Ver.1.1 Ver.1.2 Ver.1.3 Ver.1.4 Date 2008/02/29 2008/03/19 2008/04/08 2008/04/15 2008/05/28 Page All 18 10,11,12 14 10 5 10,11,12 15 10,11,12 10,11,12 19 3 20 10 10 10,11,12 10 18 10,11,12 Description Tentative specification was first issued Change External Dimension Modify Initial Register Setting Add System Diagram Modify Electro-Optical Characteristic Modify DC Characteristic Modify Initial Register Setting Modify Pin Assignment Modify Electro-Optical Characteristic & Initial Register Setting Ver.1.5 Ver.1.6 2008/07/08 2008/09/25 Ver.1.7 Ver.1.8 Ver.1.9 Ver.2.0 Ver.2.1 Ver.2.2 2008/10/02 2008/11/21 2008/12/01 2009/5/20 2009/5/22 2009/6/17 Modify Initial Register Setting Add Reliability Test Add Weight of Mechanical Data Add Package Drawing Modify Life Time Modify Electro-Optical Characteristic Modify Initial Register Setting(Gamma:6) Modify Electro-Optical Characteristic Update External Dimension Modify Initial Register Setting(Gamma:7) and Electro-Optical Characteristic 2 Document No.: 1. Purpose: This documentation defines general product specification for OLED module supplied by CMEL. The information described in this technical specification is tentative. Please Contact CMEL's representative while your product is modified. 2. General Description: Driving Mode: Active Matrix Color Mode: Full Color (16M color) Driver IC: HX5116, COG Assembly Interface: 8bit serial RGB and 24bit parallel RGB interface Application: Portable DVD, PMP, GPS, Photo Frame etc. 3. Mechanical Data: No. 1 2 3 4 5 6 7 Items Diagonal Size Resolution Pixel Pitch Active Area Outline Area Thickness Weight Specification 3.4 480 x RGB x 272 H: 156 V: 156 74.88 x 42.43 82.8 x 54.3 1.6 21 um mm mm mm g Unit Inch 3 Document No.: 4. Maximum ratings: Symbol VCC VCI Parameter Logic Supply Voltage Analog Supply Voltage Value -0.3 to +3.6 -0.3 to +3.6 Unit V V Table 7.1 Maximum ratings Maximum ratings are those values beyond which damages to the device may occur. Functional operation should be restricted to the limits in the Electrical Characteristics tables or Pin Description section. Unused outputs must be left open. 4 Document No.: 5. Electrical Characteristic: DC Characteristic DC Characteristics (Unless otherwise specified, Voltage Referenced to VSS = 0V, VCC = 1.5 to 3.6V, TA = -20 to 70C) Parameter System power supply pins of the logic block Booster Reference Supply Voltage Range DDVDH Output Voltage 1 DDVDH Output Voltage 2 VGAM1OUT Output Voltage 1 VGAM1OUT Output Voltage 2 Gate driver High Output Voltage Gate driver Low Output Voltage OLED Diode Refer Voltage Logic High Output Voltage Logic Low Output Voltage Logic High Input voltage Logic Low Input voltage Logic Input Current Pull high resistance Pull low resistance High Output Current Low Output Current Output leakage Current Output voltage offset Symbol VCC VCI DDVDH DDVDH VGAM1OUT VGAM1OUT VGH VGL ARREF VOH VOL VIH VIL IIL/IIH RH RL IOH IOL IOZ VOS Test condition Set CP1X=0 Set CP1X=1 Set CP1X=0 Set CP1X=1 Iout=-400A Iout=400A No pull up or pull low Pull up pins Pull low pins S1~S107, Vo=4.9V vs. 4V S1~S107, Vo=0.1V vs. 1V S1~S107, Vo=0.1V~DDVDH-0.1V S1~S107, Vo=0.1V~DDVDH-0.1V VCI=3.0V, Stand by mode VCI=3.0V, S1~S160 no load Min. 1.5 3.0 4.9 5.8 4.7 5.7 +3 -8 -8 0.8 * VCC 0 0.8 * VCC 0 -1 600 600 50 -1 Typ. 5.1 6.0 4.8 5.8 900 900 10 Max. 3.6 3.6 5.3 6.2 4.9 5.9 +8 -3 +8 VCC 0.2 * VCC VCC 0.2 * VCC 1 1200 1200 -50 1 Unit V V V V V V V V V V V V V A K K A A A mV Output voltage deviation Analog standby current VOD ISTB 10 10 mV uA Analog operating current Logic Pins Input Capacitance IVCI CIN 5 20 7.5 mA pF 5 Document No.: AC Characteristic AC Electrical Characteristics 6 Document No.: Clock and Data input waveforms Define the HSYNC to VSYNC timing for RGB mode 7 Document No.: 5.2.2 480RGB X 272 serial RGB interface 5.2.2 480RGB X 272 parallel RGB interface 8 Document No.: Serial RGB Horizontal Data Format Parallel RGB Horizontal Data Format Digital RGB Vertical Data Format 9 Document No.: 6. Electro-Optical Characteristic: Items Operating Luminance Power Consumption Maximum Current Response Time CIEx (White) CIEy (White) CIEx (Red) CIEy( Red) CIEx (Green) CIEy( Green) CIEx (Blue) CIEy( Blue) Viewing Angle Contrast Operation Lifetime Symbol L Pon Icc Tres Wx Wy Rx Ry Gx Gy Bx By VA CR LTop 0.23 0.25 0.615 0.30 0.195 0.61 0.10 0.11 160 5000:1 30000 0.28 0.30 0.655 0.34 0.235 0.65 0.14 0.15 170 10000:1 Hrs Min 170 Typ. 200 500 Max 230 680 210 50 0.33 0.35 0.695 0.38 0.275 0.69 0.18 0.19 Unit Cd/m mW mA uS Degree 2 Remark (1)(5) 30% pixels on (1) (1) (2) (5) (5) (5) (5) (5) (5) (5) (5) (3) (4) (1)(6) Note: Measuring surrounding: dark room Surrounding temperature: 25oC 1. Test condition: a. AR_VDD= 5.0V +/-0.03V, AR_VSS= -5.0V +/-0.03V b. IC Initial Register Setting: Gamma Setting Group7 24-bit parallel RGB (DE) Index_out(0x04); Index_out(0x05); Index_out(0x07); Index_out(0x34); Index_out(0x35); Parameter_out(0x23); //set display mode 24-bit parallel RGB (DE) Parameter_out(0x82); //set display mode Parameter_out(0x0F); //set driver capability Parameter_out(0x18); //set display timing Parameter_out(0x28); //set display timing Ver. 7 10 Document No.: Index_out(0x36); Index_out(0x37); Index_out(0x02); Index_out(0x0A); Index_out(0x09); Index_out(0x10); Index_out(0x11); Index_out(0x12); Index_out(0x13); Index_out(0x14); Index_out(0x15); Index_out(0x16); Index_out(0x17); Index_out(0x18); Index_out(0x19); Index_out(0x1A); Index_out(0x1B); Index_out(0x1C); Index_out(0x1D); Index_out(0x1E); Index_out(0x1F); Index_out(0x20); Index_out(0x21); Index_out(0x22); Index_out(0x23); Index_out(0x24); Index_out(0x25); Index_out(0x26); Index_out(0x27); Index_out(0x28); Index_out(0x29); Index_out(0x2A); Index_out(0x06); AR_VDD= +5.0V AR_VSS= -5.0V Parameter_out(0x16); //set display timing Parameter_out(0x01); //set display timing Parameter_out(0x02); //OTP On Parameter_out(0x79); //VGHVGL=+/-6V Parameter_out(0x28); //VGAM1OUT=5.02V Parameter_out(0x77); //set R slop Parameter_out(0x76); //set G slop Parameter_out(0x77); //set B slop Parameter_out(0x00); //set R_0 Parameter_out(0x00); //set R_10 Parameter_out(0x00); //set R_36 Parameter_out(0x00); //set R_80 Parameter_out(0x00); //set R_124 Parameter_out(0x00); //set R_168 Parameter_out(0x01); //set R_212 Parameter_out(0x03); //set R_255 Parameter_out(0x00); //set G_0 Parameter_out(0x03); //set G_10 Parameter_out(0x00); //set G_36 Parameter_out(0x02); //set G_80 Parameter_out(0x01); //set G_124 Parameter_out(0x02); //set G_168 Parameter_out(0x02); //set G_212 Parameter_out(0x06); //set G_255 Parameter_out(0x00); //set G_0 Parameter_out(0x02); //set B_10 Parameter_out(0x01); //set B_36 Parameter_out(0x02); //set B_80 Parameter_out(0x02); //set B_124 Parameter_out(0x03); //set B_168 Parameter_out(0x03); //set B_212 Parameter_out(0x08); //set B_255 Parameter_out(0x03); //set display on 11 Document No.: 8-bit serial RGB (DE) Index_out(0x04); Index_out(0x05); Index_out(0x07); Index_out(0x34); Index_out(0x35); Index_out(0x36); Index_out(0x37); Index_out(0x02); Index_out(0x0A); Index_out(0x09); Index_out(0x10); Index_out(0x11); Index_out(0x12); Index_out(0x13); Index_out(0x14); Index_out(0x15); Index_out(0x16); Index_out(0x17); Index_out(0x18); Index_out(0x19); Index_out(0x1A); Index_out(0x1B); Index_out(0x1C); Index_out(0x1D); Index_out(0x1E); Index_out(0x1F); Index_out(0x20); Index_out(0x21); Index_out(0x22); Index_out(0x23); Index_out(0x24); Index_out(0x25); Index_out(0x26); Index_out(0x27); Index_out(0x28); Index_out(0x29); Parameter_out(0x21); //set display mode 8-bit serial RGB (DE) Parameter_out(0x82); //set display mode Parameter_out(0x0F); //set driver capability Parameter_out(0x48); //set display timing Parameter_out(0x78); //set display timing Parameter_out(0x42); //set display timing Parameter_out(0x01); //set display timing Parameter_out(0x02); //OTP On Parameter_out(0x79); //VGHVGL=+/-6V Parameter_out(0x28); //VGAM1OUT=5.02V Parameter_out(0x77); //set R slop Parameter_out(0x76); //set G slop Parameter_out(0x77); //set B slop Parameter_out(0x00); //set R_0 Parameter_out(0x00); //set R_10 Parameter_out(0x00); //set R_36 Parameter_out(0x00); //set R_80 Parameter_out(0x00); //set R_124 Parameter_out(0x00); //set R_168 Parameter_out(0x01); //set R_212 Parameter_out(0x03); //set R_255 Parameter_out(0x00); //set G_0 Parameter_out(0x03); //set G_10 Parameter_out(0x00); //set G_36 Parameter_out(0x02); //set G_80 Parameter_out(0x01); //set G_124 Parameter_out(0x02); //set G_168 Parameter_out(0x02); //set G_212 Parameter_out(0x06); //set G_255 Parameter_out(0x00); //set G_0 Parameter_out(0x02); //set B_10 Parameter_out(0x01); //set B_36 Parameter_out(0x02); //set B_80 Parameter_out(0x02); //set B_124 Parameter_out(0x03); //set B_168 Parameter_out(0x03); //set B_212 Ver. 7 12 Document No.: Index_out(0x2A); Index_out(0x06); AR_VDD= +5.0V AR_VSS= -5.0V Parameter_out(0x08); //set B_255 Parameter_out(0x03); //set display on 2. Response Time test condition Tr 100% 90% Tf 10% Time 3. Viewing angle test condition: Vss(GND) =270 4. Contrast Luminance with all pixels white CR = Luminance with all pixels black 5. Optical tester: CA210 6. Brightness of 30% power consumption. Operating Life Time is defined when the luminance has decayed to less than 50% of the initial measured luminance before life test. 13 Document No.: 7. System Diagram: HOSTs HX5116 Serial Interface SDA SCL NCS NRESET DCLK VSYNC HSYNC DE DB (24bit) DB(24bit) RGB Interface 14 Document No.: 8. Pin Assignment: PIN Symbol I/O I I I I I I I I I/O I/O I/O I/O I/O I/O I/O Touch panel P1 Touch panel P2 Touch panel P3. Touch panel P4 Negative voltage for OLED Negative voltage for OLED Positive voltage for OLED Positive voltage for OLED Panel refers voltage of the regulator ARREF or external input voltage. (-8V~+8V) Low Voltage output of regulator VGL or external input voltage. (-3V~-8V) High Voltage output of regulator VGH or external input voltage. (+3V~+8V) Negative output voltage of the booster2. (-8.5V) Connect to the step-up circuit, capacitors according to the step-up factor. Leave this pin open if the internal step-up circuit is not used. Positive output voltage of the booster2. (8.5V) Connect to the step-up circuit, capacitors according to the step-up factor. Leave this pin open if the internal step-up circuit is not used. Description Remarks 1 TP1 2 TP2 3 TP3 4 TP4 5 AR_VSS 6 AR_VSS 7 TEST1_VS 8 AR_VDD 9 AR_VDD 10 TEST2_VD 11 ARREF 12 VGL 13 VGH 14 LVO 15 C22N 16 C22P 17 HVO 18 C21P 19 C21N 20 C11N 21 C11P 22 C12N 23 C12P 24 PVSS 25 DDVDH 26 VSSA 27 VSSA 28 VCI 29 VCI 30 VGAM1OUT open CMEL test pin, it must be open. open CMEL test pin, it must be open. I/O Connect to the step-up circuit, 4capacitors according to the step-up factor. Leave this pin open if the internal step-up circuit is not used. P I/O P P P P I/O I/O Charge pump ground pin, it must connect to external ground. Output voltage of the booster1. (5.1V/6.0V) Analog ground pin. It must connect to external ground. Analog ground pin. It must connect to external ground. A power supply for the Analog circuit. (3.0V~3.6V) A power supply for the Analog circuit. (3.0V~3.6V) Output voltage of the VGAM1OUT regulator and used positive power of source driver. (4.8V/5.8V) Internal logic voltage input or output pin VDC_ENB=0, VDDD is output, please connect to 1uF capacitor. VDC0 VDDD Status 31 VDDD 15 Document No.: 0 1 1.8V 2.5V Normal display OTP program VDC_ENB=1, VDDD is input. (Input range = 1.6V~2.75V) 32 VCC 33 VSSD 34 NRESET 35 NCS 36 SCL 37 SDA P P I I I I I A power supply for the Digital circuit. (1.5V~3.6V) Digital ground pin. It must connect to external ground. Reset pin. Setting either pin low initializes the LSI. Must be reset after power is supplied. (Normally pull high) Serial Interface chip enable pin. (Normally pull high) Serial Interface clock input pin. (Normally pull high) Serial Interface data line. (Normally pull high) Data enable: When VSYNC+HSYNC+DE mode, DE=H: Data enable, DE=L: Data disable (Black). (Normally pull low) Frame synchronizing signal. 38 DE I 39 VSYNC I 40 HSYNC I 41 DCLK 42 D27 43 D26 44 D25 45 D24 46 D23 47 D22 48 D21 49 D20 50 D17 51 D16 52 D15 53 D14 54 D13 55 D12 56 D11 57 D10 58 D07 I If VSPL=0: Active low. If VSPL=1: Active high. Line synchronizing signal. If HSPL=0: Active low. If HSPL=1: Active high. Dot clock signal. If DPL=0: Data are input on the rising edge of DOTCLK. If DPL=1: Data are input on the falling edge of DOTCLK. Digital data input. DX0 is LSB and DX7 is MSB. (Normally pull low) 1. If parallel RGB input mode is used, D0X, D1X, and D2X indicate R, G, and B data in turn. 2. If serial RGB or RGBD or CCIR601 or CCIR656 input mode is selected, only D07~D00 are used, and others short to GND. DX7~DX0 has 8-bit width, respectively to compose 16,777,216 color and 256 gray scale of 1 pixel. 16 Document No.: 59 D06 60 D05 61 D04 62 D03 63 D02 64 D01 65 D00 66 TEST3_W 67 AR_VDD 68 AR_VDD 69 AR_VSS 70 AR_VSS 71 TEST4_P open CMEL test pin, it must be open. I I I I Positive voltage for OLED Positive voltage for OLED Negative voltage for OLED Negative voltage for OLED open CMEL test pin, it must be open. 17 Document No.: 9. External Dimension: 18 Document No.: 10. Reliability Test: No Item 85, 240hr -40, 240hr 60, 240hr -40, 240hr 85, 85 % RH, 240hr Specification 1 High Temp. Storage 2 Low Temp. Storage 3 High Temp. Operation 4 Low Temp. Operation 5 High Temp./ High Hum. Storage 6 High Temp./ High Hum. Operation 60, 90 % RH, 240hr -40, 30 min. --> 85, 30 min., 100 cycles 7 Thermal Shock storage 8 ESD 9 Packing Test TBD TBD Test and measurement conditions All measurements shall not be started until the specimens attain to temperature stability. The degradation of Polarizer is ignored for item 1, 5 & 6. The test pattern at operating condition is 30%P.C. alternating pictures. Evaluation Criteria No damage to glass or encapsulation No drastic change to display Defects / Mura follow product specification Luminance: Within +/-50% of initial value Current consumption: within +/-50% of initial value 19 Document No.: 11. Package: 20 |
Price & Availability of P0340WQLC-T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |